TSX-V:GGA OTC:GGAZF

2011 News Releases

May 25, 2011

Goldgroup Cuts Additional 100-Plus Metre Intercepts of Oxide Gold at Caballo Blanco, Mexico

DDH 11 CBN 79: 100.10 m @ 0.88 g/t Au
DDH 11 CBN 82: 154.00 m @ 0.59 g/t Au

Other Higher-Grade Intercepts Include:
DDH 11 CBN 84: 64.00 m @ 1.20 g/t Au


Vancouver, British Columbia (May 25, 2011) - Goldgroup Mining Inc. ("Goldgroup" or the "Company") is pleased to announce that additional diamond drill holes at its Caballo Blanco gold project in Veracruz, Mexico have yielded significant gold intercepts, extending the La Paila oxide gold zone to the west and southwest. All the drill holes reported below (see Tables 1 and 2) are exploration holes. Drilling remains ongoing to define and to delimit the eastern and southwestern flanks of the La Paila gold zone as the zone currently remains open in these two directions.

Keith Piggott, President and CEO of Goldgroup, stated: "These diamond drill results yielded gold intercepts contained in completely oxidized rock occurring inside and peripheral to the existing La Paila zone. They are similar in grade to the current NI 43-101 estimated mineral resource and give better definition to allow the design of the first open pit. The current drilling program, together with the on-going column-leach metallurgical testing, environmental and sociological studies as well as the heap-leach pad design form the basis for targeting to bring Caballo Blanco into production in 2012."

Table 1. Drill-Hole Results for the Caballo Blanco Project, Mexico

DIAMOND DRILLING - LA PAILA ZONE
Diamond Drill Hole Mineralization
From (m) To (m) Interval (m) Au grade (g/t)
11 CBN 75 98.00 102.00 4.00 0.66
and 134.00 180.00 46.00 0.35
11 CBN 76 81.10 85.10 4.00 0.98
and 106.14 121.50 15.36 0.37
and 131.50 156.21 24.71 0.22
and 164.21 177.45 13.24 0.28
and 191.89 209.89 18.00 0.25
and 284.50 289.50 5.00 0.34
11 CBN 77 98.00 106.00 8.00 0.70
and 120.00 138.00 18.00 0.40
and 152.00 174.00 22.00 1.39
11 CBN 77 cont. 198.00 224.00 26.00 0.30
and 232.00 256.00 24.00 0.41
11 CBN 79 47.40 147.50 100.10 0.88
11 CBN 80 93.40 153.40 60.00 0.76
11 CBN 82 81.50 235.50 154.00 0.59
and 247.50 263.50 16.00 0.23
and 293.50 303.50 10.00 0.48
11 CBN 83 98.50 146.50 48.00 0.90
and 194.50 216.50 22.00 0.41
and 240.50 248.50 8.00 0.21
11 CBN 84 86.84 150.84 64.00 1.20
and 278.40 291.10 12.70 0.32
11 CBN 85 63.33 73.33 10.00 1.33
and 92.96 160.02 67.06 0.35
11 CBN 86 102.36 107.93 5.57 0.53
and 133.93 140.10 6.17 0.46
For a drill hole location map, click here.



A high percentage of the holes presented above that intersected gold mineralization are in excess of the 0.2 g/t Au cut-off grade used in estimating the inferred mineral resource presented in the current Caballo Blanco NI 43-101 technical report, as amended February 28, 2011, and available on SEDAR. These results are part of the current drill program and are intended to be used in the preparation of an updated mineral resource estimate. A complete summary of the assay results from diamond drill holes 10 CBN 54 to 11 CBN 86 as well as a drill-hole location map of the La Paila zone detailing the relative locations of the drill holes used in estimating the current NI 43-101 mineral resource, will be posted on the Company's website under "Projects -- Caballo Blanco" at www.goldgroupmining.com.

Table 2. Drill Hole Data, Caballo Blanco Project, Mexico

DD Hole Number East UTM Coord (metres) North UTM Coord
(metres)
Elevation
(m.a.s.l)
Azimuth
(degrees)
Plunge
(degrees)
Total Length
(metres)
11 CBN 75 768338 2184494 484 090 -45 234
11 CBN 76 768339 2184546 480 090 -45 364.5
11 CBN 77 768156 2184153 479 090 -70 301.5
11 CBN 79 768213 2184211 472 na -90 202.5
11 CBN 80 768306 2184251 513 090 -75 315.3
11 CBN 82 768307 2184251 513 090 -50 335
11 CBN 83 768199 2184152 495 090 -70 310.5
11 CBN 84 768235 2184250 505 na -90 314.5
11 CBN 85 768337 2183886 502 na -90 220.6
11 CBN 86 768154 2184104 487 270 -70 253.5
m.a.s.l = metres above sea level; Coord = Coordinate; na = not applicable


About Caballo Blanco

Goldgroup owns a 70% interest in Caballo Blanco. The remaining 30% interest is owned by Almaden Minerals Ltd. The Caballo Blanco project consists of a series of oxide gold zones located in the Veracruz province of eastern Mexico. The principal gold zone at Caballo Blanco is the La Paila prospect located within a cluster of high-sulphidation epithermal gold deposits referred to as the Northern Zone. The current estimated mineral resource for La Paila consists of 139,000 ounces of gold (6.7 million tonnes grading 0.65 g/t Au) contained in the category of indicated resources and 517,000 ounces of gold (27.6 million tonnes grading 0.58 g/t Au) contained in the category of inferred resources. This estimate was compiled from 32 diamond drill holes totaling approximately 7,000 metres completed by NGEx Resources Inc. prior to Goldgroup's acquisition of its interest in the project from NGEx in November, 2009. Other known gold zones at Caballo Blanco occur approximately 7 km to the southeast at the Highway Zone. These gold zones have yet to be drill tested.

Assaying and Qualified Person

After project geologists logged and marked the core, technicians cut the individual lengths with a diamond saw, then tagged the bags and secured them with security clips. The samples were then collected by Inspectorate America Corp. ("Inspectorate") and transported to their preparation facility at Durango, Mexico where they were dried and crushed to -150 mesh. The rejects remained with Inspectorate while the pulps were air couriered to Inspectorate's Richmond, BC, Canada facility and analyzed for gold by fire assay with Atomic Absorption ("AA") finish. In addition, a 30 element Inductively Coupled Plasma ("ICP") analysis (aqua regia digest) was conducted on all samples. A QA/QC program was implemented as part of the sampling procedure for the drill program. One standard, one blank or one duplicate was inserted per group of 15 samples sent the laboratory. This news release has been prepared under the supervision of Mr. Kevin Sullivan, B.Sc. MAusIMM, and the Company's Vice President of Exploration who serves as the qualified person as defined by National Instrument 43-101 responsible for ensuring that the scientific and technical information in this release is accurate.

About Goldgroup

Goldgroup is a well-funded Canadian-based gold production and exploration Company focused exclusively on Mexico, targeting growth in gold production, mineral resources, profitability and cash flow from a portfolio of production, development and exploration stage projects. The Company owns and operates the Cerro Colorado Gold Mine in Sonora, Mexico. Goldgroup's property portfolio includes its interests in its flagship project, Caballo Blanco in Veracruz and the San José de Gracia project in Sinaloa.

Goldgroup is lead by a team of highly successful and seasoned individuals with extensive expertise in exploration, corporate finance and mine development in Mexico.

For further information on Goldgroup Mining, please visit www.goldgroupmining.com
or contact:

Keith Piggott, President & CEO
T: 604-682-1943

David Fry, Corporate Development

Toll Free: 1-877-655-ozAu (6928)